OHSOFT
Fiber Optic
Optical fiber is a technology that uses thin fibers made of glass or plastic to transmit information in the form of light signals.
Optical Attenuator SC/APC
Its main function is to reduce the signal power optical signal power that is too high, so as not to damage equipment such as receivers. It is usually used when optical devices are too close to each other and the signal is too strong. For example in FTTH (Fiber to the Home) systems or data center networks.
Fiber Optic Attenuator SC/UPC
passive components used in fiber networks optical network to reduce the strength (power) of light signals sent through the fiber, without changing the shape or signal quality. The goal is to avoid overload power (overload) on receiving devices such as OLT (Optical Line Terminal) or ONU (Optical Network Unit). (Optical Line Terminal) or ONU (Optical Network Unit), which can cause damage or interruption of transmission Translated with DeepL.com (free version)
CAT 6 UTP Cable
CAT6 UTP is a good choice for networks
that require high data rates and reliable performance. This cable supports applicationssuch as Gigabit Ethernet, 10G Ethernet, and various other network applications that require greater bandwidth.
SFP & QSFP
SFP (Small Form-factor Pluggable) and QSFP (QuadSmall Form-factor Pluggable) are types of moduletransceiver modules used in computer networks to connect network devices such as switches, routers, anddevices such as switches, routers, and NICs (Network Interface Card). SFP supports one data channel, while QSFP supports four data channels.
.jpeg)
Connector RJ45 Cat 6
Connectors used to connect Cat6 Ethernet cable to a network device such as router, switch, or computer. This connector specifically designed to support the Cat6 standard, standard, which has a higher data transmission speed than the Cat5e standard. one-piece design, and is suitable for solid and unshielded fibrous 24~26. Terminal bar 3-prong contact offers reliable and fast and reduces crosstalk interference
which improves network transmission speed which is good.
Patch Cord Cable
A short cable with connectors at both ends that is used to connect network devices such as computers, servers, routers, or switches. The patch cord cable serves as a physical link between devices in a network. It allows devices to communicate with each other and exchange data smoothly. A good patch cord cable can optimize data transmission and reduce the potential for interference or signal loss. Proper selection and maintenance of patch cord selection and maintenance are also important for maintaining network network stability.
Joint Closure Fiber Optic
24 Core
A protective box used to protect optical fiber connection or termination with capacity of 24 cores. Joint Closure 24 Core Fiber Optic serves to protect the splicing (splicing) or fiber optic cable termination so that it is not exposed to damaging environmental conditions and maintain signal transmission quality.
Preconnector Sc/Upc
1 Core 3
Type of fiber optic cable (fiber optic) that has been
installed SC connector (Subscriber Connector) with a type of UPC (Ultra Physical Contact) at one end. The type of SC connector that has a physical surface which is smoother and flatter, thus provides better signal transmission compared to standard SC connectors.
Preconnector Sc/Apc
1 Core 3
A type of fiber optic cable that has an SC/APC connector at one end. “SC” is the type of connector, “APC” is a type of end polishing that provides an angle of deviation to reduce reflections, “1 CORE” indicates that the cable has only one optical fiber core, and “3” likely refers to the number of connectors contained in the cable, or the type of cable that has 3 shielding layers, or it could also refer to the length of the cable (3 meters, for example).
Fast Connector
SC- APC / SC -UPC
A fiber optic device designed to connect two optical fibers quickly and easily, especially in FTTH (Fiber to the Home) applications. This connector utilizes the common SC connector with added polishing APC polishing that reduces back light reflection. The first connector to be installed on the market after the ceramic ferrule was introduced, were also known as the “square connector”. Originally used for Gigabit Ethernet, it was standardized by the telecommunications specification TIA-568-A in 1991.
Splitter, 3-Way Split Un-
balance Ext
A type of device used to hang or support cables or
other components, especially those shaped like These devices are often used in various industries, including the cable industry, construction, and telecommunications.
Splitter, 2-Way Split
External
A device used to split a signal from one source to two or more devices. This splitter, as shown in the picture, has the specifications CLD-204D-OD specifications and a frequency range of 5-1000MHz. it works is by taking the power at the input port and splitting it evenly between the output ports. output ports. Coaxial splitters are plug-and play device that is easy to install. Besides being used for audio and video signals, splitters can also be used to split CATV signals or cable satellite television services.
Get a Quote
We will send you the best offer immediately.